Ashscan Duo with integrated MoistScan® Moisture Analyser

The Ashscan Duo has been designed to be simple to install and affordable. It has the ability to be more accurate than conventional labour intensive techniques but also provide real-time information. Ash and Moisture results are continually updated to enable control room operators to make the necessary adjustments that will optimise their process. High Performance Ash & Moisture Analyser designed for the toughest conditions.

Bed depths <400mm    |    Instantaneous results    |     Ease of installation





                   

	FEATURE
	Rapid real-time results
	No traditional sampling required
	No preparation and analysis of samples
	Simple industry standard interfacing
	Single enclosed design for accurate Ash and Moisture monitoring
	Patented integrated microwave MoistScan® moisture analysis system

	OPERATIONAL
	Conveyor Speed		No Limit
	Material top size		Up to 400mm, typically
	Bed depth range		20 - 400mm depending on material
	Range		Moisture: 0 - 50% / Ash: Unlimited
	Measurement		Instantaneous, user selectable readout time
	Instrument Precision		Ash in typical raw coal typically +/-0.9%
			Ash in typical washed coal typically +/- 0.6%
			Moisture: Typically 0.3% at 1 std dev
	ELECTRICAL REQUIREMENTS
	At Electronics Control Cabinet		240 or 110 volt, single phase, 2 amp supply
	ENVIRONMENTAL REQUIREMENTS
	Operating Temperatures		0 - 45°C, with protection from direct sun and rain
	Humidity		0 - 95%, relative humidity (non condensing)
			Note: All units are protected against dust and moisture to IP 65 rating.
	RADIATION LEVELS
	100uSv/hr		Maximum radiation dose rate at all points except in direct beam
	OUPUTS FROM THE ASHSCAN DUO
	Instantaneous Moisture and Ash		Isolated 4 - 20mA current loops indicating the rolling average of moisture and ash content over any accumulated time period.
	System running		Relay closure indicating that no alarm conditions exist.

Contact us should you have any questions or require further information.